Project: Richard-Atlanta, Georgia United States
Semi-Arched Teak Single Door without Frame / Eyebrow Style

1. Monday, 05-Jun-2006 >> First photo update is scheduled for 20-Jul-2006
2. Monday, 05-Jun-2006 >> WoodCiti® Studio will provide Certificate of Authenticity for no extra cost if requested..
3. Saturday, 01-Jul-2006 >> We assemble the door now. Probably the door we'll be completed on 30-Sep-2006 due to a large amount of carving. Next update in 2 weeks...
4. Sunday, 16-Jul-2006 >> Door is assembled. We are working on carving design now. Next week will start the carving...
5. Monday, 28-Aug-2006 >> The door is completed and ready for shipping at any time..

DOOR RECEIVED: 24-Oct-2006 >> Wow! Wow! Wow!!!!! The door is even more beautiful than the photos depicted. It arrived this evening at 5:30 pm EDT after passing customs and all that goes into the shipment of such a gorgeous portal! The packing was intact and the door arrived without a scratch. Now we must get an artisan to mount the door and make sure of proper installation. If you know of a good wood artisan in the Atlanta area, we would appreciate a referral. Thanks again! Richard

Send email to The-Wood® Door Studio now  

Latin name "Tectona Grandis Linn". Teak or Golden Teak is the king of hardwoods and it's one of the world's most valuable timbers, recognized for its durability and stability. Teak is more durable than any other hardwood and has unparalleled rich beauty. Teak can withstand all types of weather. Ancient Burmese and Thai royalty considered teak to be a royal tree. It has been the pillar of the shipbuilding industry for centuries. The decks of the Titanic were covered in Teak, and the wood is as good today as the day she sank on 1912. Teak is also used in the Middle East oil industry as one of the very few timbers that can withstand the punishing heat of the desert and will not readily catch fire. Teak can withstand harsh chemicals, and is resistant to fungi, rot and termites. Unlike other woods, teak does not turn black when in contact with metals. It looks best when applied transparent and light colors...

KILN-DRYING

All wood in the oven for two (2) weeks to a moisture content of 8-10% followed by one (1) week of ‘resting’ to reabsorb moisture in the air to ~12%. The moisture level is measured by electronic instruments.

PANELS

Structural hardwood V-grooved minimizes the possibility of a joint separation. Permanently bonded with watertype-1 glue.

STILES & RAIL CONSTRUCTION

Mortise and tenon, glued with exterior Type-1 waterproof glue. Because wood tends to warp when it becomes damp, we make vertical rails from two separate pieces of wood, then laminating them together lengthwise, with the grain running in opposite directions. The same is done with the stiles. Then when moisture penetrates the door, the laminated pieces tend to bow in opposite directions, negating the warping effect.

MOLDING

Molding around lites and panels. Certain designs have recessed molding.

PANEL END SEALING

All panels are end sealed with under coat paint before the door is assembled to minimize shrinking and swelling.

Authentic hand carving by best Thailand’s craftsmen. No routers, no machine tools are used. Over 4,000 carving styles available for doors frames casing and lintels in many categories such as Americana, animals, architectural, Asian, business, Disney, dragons, mythology, nautical, wildlife and much more...

SANDING

Machine sanded with super fine No. 220 grit paper followed by detailed hand sanding. No machine or cross grain sand marks. Ready for finish.

Three Separate coats of alkyd moisture seal with fine sanding between coats

DOOR PACKING

Each door is individually poly bagged and boxed with 300# psi doubled wall cardboard and placed in wooden crate.

FUMIGATION

Every door together with wood crating, pallet and all Non-Manufactured Wood Packing Material (NMWP) to be fumigated with Methyl Bromide [CH3Br] and are free from wood termites. Formal Certificate of Fumigation is provided according to wood import regulations of European Union, United States, Canada, New Zealand and Australia.

DOOR WARRANTY

The-Wood Studio Limited Warranty

CERTIFICATE OF AUTHENTICITY

We issue a Lifetime Certificate of Authenticity. The-Wood Studio certifies that every door we design and make is by order only. This is an original and authentic product. It is genuine and the only one made by The-Wood Studio. It is not a replica, a rebuild or repair; it has been newly built by skilled artisan. No two doors are identical, thus making each one of a kind. Only authentic hand carving is performed, no routers or machine tools of any type are used.

1. Insurance 100% from damage or loss by a company based in Atlanta
2. Atlanta based shipping company in charge
3. Sea-freight from Bangkok Thailand to Atlanta, Georgia USA
4. Transit Time: 40 days

Updated 05-Jun-2006